Hikvision DS-3E1518P-SI

Shell

Metal material

Net Weight

2.735 kg (6.03 lb)

Gross Weight

3.31 kg (7.30 lb)

Dimensions (W × H × D)

440 mm × 44 mm × 220.8 mm (17.32” × 1.73” × 8.69”)

Operating Temperature

0 °C to 45 °C (0 °F to 113 °F)

Storage Temperature

-40 °C to 85 °C (-40 °F to 185 °F)

Operating Humidity

5% to 95% (no condensation)

Relative Humidity

5% to 95% (no condensation)

Power Supply

100 to 240 VAC, 50/60 Hz, Max. 4 A

Installation Mode

Rack (equipped with mounting ears)

Max. Power Consumption

250 W

Power Consumption in Idle

25 W

Surge Protection

6 KV surge protection for PoE ports.

Ports

16 × Gigabit PoE port,2 × Gigabit fiber optical port

MAC Address Table

8 K

Switching Capacity

56 Gbps

Packet Forwarding Rate

41.66 Mpps

Internal Cache

4.1 Mbits

PoE Standard

IEEE 802.3af,IEEE 802.3at

PoE Power Pin

End-span: 1/2(+), 3/6(-);

PoE Port

PoE: Ports 1 to 16

Max. Port Power

30 W

PoE Power Budget

225 W

Long Range

Ports 1to 16: up to 300 m.;Long range performance may vary depend on camera model or cable condition.

Port Isolation

Ports 1to 16: port isolation mode to improve network security.;Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE Watchdog

Ports 1to 16: auto detect and restart the cameras that do not respond.

Link Aggregation

Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.;Support static link aggregation.;Support 8 aggregation groups.

QoS

QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.;Support port-based priority configuration.;Support SP, WRR priority schedule mode.

Loop Prevention

Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.;Support 802.1D STP.

VLAN

VLAN is used for network scale planning and network health improvement.;Support 802.1Q.;Configurable VLAN ID from 1-4094.;Support Trunk, Access port mode.;Support Max. 4094 VLAN.

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported:;1. Display the port rate.;2. Display the port bandwidth utilization rate.;3. Display topology information.;4. Display the alarm status.;5. Restart ports and devices.;6. Remotely upgrade the device.

System Maintenance

Remote upgrade, default parameters recovery, logs viewing, basic network parameters configuration, import and export configuration, time sync

Port Rate-Limiting

Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.

Storm Control

Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication.;Support port rate limiting based on broadcast, multicast, and unknown unicast packets.

EMC

FCC (47 CFR Part 15,Subpart B); ;CE-EMC (EN 55032: 2015,EN IEC 61000-3-2: 2019,EN 61000-3-3: 2013+A1: 2019,EN 50130-4: 2011 +A1: 2014,EN 55035: 2017); ;IC (ICES-003: Issue 6); ;RCM (ASNZS CISPR 32: 2015)

Safety

UL (UL 60950-1); ;CB (IEC 60950-1:2005,AMD1:2009,AMD2:2013,IEC 62368-1: 2014 (Second Edition); ;CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013,EN 62368-1: 2014+A11: 2017)

Chemistry

CE-RoHS (201165EU); ;WEEE (201219EU); ;Reach (Regulation (EC) No.19072006)