Hikvision DS-3E1528P-SI-24P4F

Shell

Metal material

Net Weight

2.8 kg (6.17 lb)

Gross Weight

3.46 kg (7.63 lb)

Dimensions (W × H × D)

440 mm × 44 mm × 220.8 mm (17.32”× 1.73”× 8.69»)

Operating Temperature

0°C to 45°C (0 °F to 113 °F)

Storage Temperature

-40 °C to 85 °C (-40 °F to 185 °F)

Operating Humidity

5% to 95% (no condensation)

Relative Humidity

5% to 95% (no condensation)

Power Supply

100-240 V,50/60 Hz,6.3 A Max

Installation Mode

Rack (equipped with mounting ears)

Max. Power Consumption

400 W

Power Consumption in Idle

10 W

Surge Protection

6 kV

Ports

24 × Gigabit PoE port,4 × Gigabit fiber optical port

MAC Address Table

8 K

Switching Capacity

56 Gbps

Packet Forwarding Rate

41.66 Mpps

Internal Cache

4.1 Mbits

PoE Power Pin

End-span: 1/2(-), 3/6(+)

PoE Port

PoE: Ports 1 to 24

Max. Port Power

30 W

Port Isolation

Ports 1to 28: port isolation mode to improve network security;Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

Link Aggregation

Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.;Support static link aggregation.;Support 8 aggregation groups.

QoS

QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.;Support port-based priority configuration.;Support SP, WRR priority schedule mode.

Loop Prevention

Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.;Support 802.1D STP.

VLAN

VLAN is used for network scale planning and network health improvement.;Support 802.1Q.;Configurable VLAN ID from 1-4094.;Support Trunk, Access port mode.;Support Max. 4094 VLAN.

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported:;1. Display the port rate.;2. Display the port bandwidth utilization rate.;3. Display the PoE power usage.;4. Display topology information.;5. Display the alarm status.;6. Restart ports and devices.;7. Enable port long-rage mode.;8. Remotely upgrade the device.

System Maintenance

Support device management via web.;Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.;Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.;Support management via Hik-Central Pro.;Support remote management via Hik-Partner Pro. ;Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.;Supports 802.1ab LLDP for peer device discovery.;Support SNMP v1/v2c for third-party management platform access.;Support port mirroring for fault locating.

Port Rate-Limiting

Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.

Storm Control

Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication.;Support port rate limiting based on broadcast, multicast, and unknown unicast packets.

DHCP Snooping

DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.

ACL

Port security strategy.;Support 64 ACL table entris.;Support 128 configuration rules under single ACL.

IPSG

IPSG can control the security of port access device.;Support port, MAC, IP binding.;Support 256 security table entries.

EMC

CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)

Safety

CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)

Chemistry

CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)