Hikvision DS-PM2-S(EU) — 3G/4G Communication Module(EU)
Hikvision DS-PM2-S(EU) — 3G/4G Communication Module(EU)
- Inputs(Zones)
- Max. Zones
96
- On-board zones
8
- Bus PIR-cameras
36
- Outputs
- Max. outputs
96
- On-board PGM outputs
2
- On-board relay outputs
2
- Auxiliary Power Output
1
- On-board sounder output
1
- Areas
- Area
48
- Peripherals
- Keypads
24
- 8-zone expanders
12
- 8-relay expanders
24
- Wireless receivers
12
- Power supply units
15
- Video verification
- Network camera channels
32
- Video verification network camera channels
Up to 4 (1080p)
- Video verification clip duration
7 seconds
- Pre-record
2 or 5 seconds
- Programming
- Automation scenarios
256
- Event logs
- Event log records
4950 including 1000 mandatory in flash memory
- Users
- Admin
1
- Installer
1
- Max. operators
128
- User (Cloud)
64
- Authorization devices
- Keyfobs
64
- Tags
200
- Bus interconnection
- Bus ports
2
- Bus technology
Half-Duplex RS-485
- Bus wiring
4-Core Alarm Cable (at least 2 × 0.5 mm² + 2 × 0.22 mm²)
- Bus topologies
Daisy Chain, Cascade, Star, Ring
- Range per Bus
Up to 500m (Up to 7.5km with bus-extenders, Up to 4km in loop mode, Up to 1km in compatible mode)
- Bus-extenders per Bus
Up to 15 pcs, 500m in between
- Devices per Bus
48 (32 in compatible mode)
- Communication interfaces
- LAN/Ethernet
10/100 Mbps self-adaptive
- Wi-Fi
802.11b/g/n (2.4GHz)
- GPRS
Compatible with DS-PC501G(Optional)
- 4G/LTE
Compatible with DS-PC502S (Optional)
- PSTN
Compatible with DS-PM2-P(Optional)
- ARC connectivity
- ARCs
4
- Signaling protocols
ISUP, Contact ID(PSTN), SIA DC-09, CSV-IP, OTAP
- Ack. operation
Pass-through
- ATS Categories
SP3, DP2 (with optional GPRS/4G communicator)
- 3rd party communicator
Compatible with FSK, RDC, IDS modules
- Power supply — general
- PS type
Type A
- Quiescent current
130 mA @15VDC (when on battery)
- Power supply — primary power supply
- Mains Input
100-240VAC 50/60Hz, 0.3A
- Power supply capacity
15.3 VDC 2.5 A (0.5 A dedicated to battery)
- Power supply — auxiliary power supply
- Battery pack
1 × rechargeable sealed lead-acid (SLA) battery (not included by default)
- Battery capacity
12VDC, up to 7Ah (≥ 5600 mAh in charged state)
- Recommended battery
OUTDO OT7-12 (7Ah), Yuasa NP7-12FR (7Ah)
- Battery stand-by
Up to 12 hrs
- Recharge period
24 hrs to 80% (5600 mAh)
- Floating voltage
13.8VDC
- Low energy voltage
11.60±0.5 V (Restore when rise above 11.74±0.5 V)
- Cut-off voltage
11.0 VDC for deep-discharge protection
- Power supply — auxiliary power output
- Output capacity
Nominal 14.5VDC 1.5A, range 10.7-15 VDC with up to 120 mV ripple (Vpp)
- Output protection
1.7 A resettable eFuse
- Power supply — Bus power output
- Output capacity
Nominal 14.5VDC, range 10.7-15 VDC with up to 120 mV ripple (Vpp), max. 20W (shared AUX power output)
- Output protection
(Shared AUX power output)
- Power supply — sounder power output
- Output capacity
Nominal 14.5VDC 1.0A, range 10.7-15 VDC with up to 120 mV ripple (Vpp)
- Output protection
1.3 A resettable eFuse
- PGM output
- Output voltage
0 VDC with switched (NPN output)
- Max. current
200 mA per output
- Relay output
- Relay output
3A 30VDC, 1A 250VAC
- Environmental
- Operating temperature
-10°C to 50°C (14°F to 122°F), indoor use only
- Storage temperature
-20°C to 60°C (-4°F to 140°F)
- Relative humidity
10% ~ 90% non-condensing
- Physical
- Dimension (W × H × D)
231 × 133 × 44 mm
-
488 g
- Compliance
- Electrical conformity
CE, CB
- EN 50131
Security Grade 2, Environmental Class II
Отзывы
Отзывов пока нет.